| Method of Printing: | Ink-Jet |
| Print Resolutions: | 2880 X 1440dpi
1440 X 720dpi
720 X 720dpi Recommended for photographic detailed images.
360 X 360dpi Recommended for non-critical images. |
| Max. Printable Length: | 48" (121cm) Without metal holding ring. 47.5" (54.5cm) With metal holding ring. |
| Max. Printable Width: | 16.5" (41cm) Without metal holding ring. 16 " (40.5cm) With metal holding ring. |
| Interface Ports: | Parallel Interface, USB, IEEE1394 AC110v +-10% with power trans. Pre-installed |
| Power: | AC 110v - 230v. 35watts (Approx. 1 amp.) |
| External Dimensions: | Length: 82 " (208cm)
Width: 34 " (86.4cm) With bulk ink system.
Height: 47 " (119.4cm)
* The Fast T-Jet™ Blazer will fit fully assembled through a 36" doorway. If necessary the printer unit may be removed from the base to accommodate a smaller doorway. |
| Recommended Environment: | The T-Jet™ Blazer will operate best in a clean, dust-free room at a steady temperature between 50°F and 95°F (10°C and 35°C), with relative humidity between 35% and 80% (non-condensing). Operation of the printer at humidity below the recommended temperature range will result in poor nozzle print performance and poor print image quality. |
