High production dryer for mid to large sized shops that need outputs of 600* or 1200* pcs/hr/chamber. A compact powerhouse with many advanced
features such as: digital temperature control, power exhaust and air
recirculation. Redesigned for whisper quiet operation.
The EC-II-54 with a single chamber has the capacity to keep up with
small automatics. Add a second chamber and you have the power to cure
1200* shirts per hour in only 10½ feet. With a 54" wide belt you can run
two or three rows of shirts with standard size prints or all-over
prints.
*Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.
Electric: 240V/ 64A / 1 Phase / 3 wire / 50/60HZ
240V/ 35A / 3 Phase / 4 wire / 50/60HZ
*** Wire and plug not included. Terminal block provided for on-site
electrical hookup. Must adhere to local regulations. Consult licensed
electrician. ***
Production: 600+ Plastisol Shirts/Hour* (Add a 2nd chamber for 1200+ plastisol shirts/hour*)
Belt Width: 54"
Belt Speed: 1-16 FPM
Overall Dimensions:
(L x W x H) 87" x 70" x 61"
Chamber Length: 36"
Chamber In-Feed Width: 58.5"
Chamber In-Feed Height: 2" - 7" (adjustable)
Heater Dimensions: (2) 12" x 48"
Heater Wattage: 14,400 watts (2 x 7,200)
- "X-Series" Conveyor Belt Tracking System
- Focused Exhaust Air System evacuates fumes and moisture quickly
- Infrared Focusing System: 2" - 7" belt-to-heater clearance
- Heavy duty DC belt speed motor with digital voltage display
- Digital PID Temperature controller is accurate to +/-1°F
- 3 Year Defect Warranty
- 15 Year Heater Warranty
Optional:
- Belt Extensions (18", 36", or 54")
- Wheel set with locking casters for easy mobility
- Hat Support Rail
Call
(800) 621-4173 for more information regarding additional options. Such as an exhaust hood, low friction belt aligner
(recommended for longer conveyor belts), and heavy duty belt motor (also recommended for longer conveyor belts).
*Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.
Specifications for EC-II-30 with Double Chambers
Electric: 240V/ 117A / 1 Phase / 3 wire / 50/60HZ
240V/ 69A / 3 Phase / 4 wire / 50/60HZ
*** Wire and plug not included. Terminal block provided for on-site
electrical hookup. Must adhere to local regulations. Consult licensed
electrician. ***
Production: 1200+ plastisol shirts/hour*
Belt Width: 54"
Belt Speed: 1-16 FPM
Overall Dimensions:
(L x W x H) 123" x 73.5" x 53"
Chamber Length: 72"
Chamber In-Feed Width: 58.5"
Chamber In-Feed Height: 2" - 7" (adjustable)
Heater Dimensions: (4) 12" x 48"
Heater Wattage: 28,800 watts (4 x 7,200)
What is the Infrared Focusing System?
Infrared emitters have an optimal distance at
which they operate most efficiently. If the emitter is too far away
energy is wasted and lost in the distance. If the emitter
is too close the substrate may come in contact with the emitter
surface. Adjusting the heater height is an absolute necessity if the
products that you print vary in height. We want to maintain an
approximate distance of 2 1/2" from heater surface to ink.