Brite Discharge Super 75 White is a blended discharge white that produces an opaque discharge white with excellent printability.
- Easy to mix and print
- Surface Appearance - Matte
- Can be blended with Neo Pigments up to 15% to achieve pastel colors
- Economical version of Brite Discharge White
- Excellent printability with no viscosity modifications
- Extremely soft hand feel that PVC inks cannot achieve
- Printed product can be dry cleaned or ironed
- CPSIA and HR4040 compliant
Recommended Fabric:
100% Cotton
Surface Appearance:
Matte
Special Recommendations/Modifications:
Brite Discharge Super 75 White should be mixed in clean vessels using clean mixing blades and utensils. Any contamination from other ink sources or non-approved additives could make Brite Discharge Super 75 White test positive for restricted PVCs.
Retarder MG (1% to 5%) to help with open time in the screen
Fixer WF-N (1% to 5%) to help with wash fastness
Softener MG (1% to 4%) to help penetrate into the garment
Thickener B (0.25% to 1%) to help thicken the ink
RV Additive (1% to 3%) to help reduce viscosity (thin the ink)
Screen Mesh:
110 - 305 t/in
Emulsion:
Direct or indirect
Squeegee:
60-75 Durometer, Sharp
Cure Temperature:
320°F fusion temperature, gel point - 160°F
Clean-Up:
Water and mild soap or detergent;
Also recommended: ReadyWipe Press Spray/Wipe for at-press clean-up, ReadyWash Ink Degradent for ink removal at washout booth/station.
Storage:
Recommended storage 65°F to 95°F. Avoid direct sunlight.
Technical Data Sheet